1/4 Murrelektronik
Murrelektronik 7000-14801-0000000
Ürün kodu
7000-14801-0000000
Teknik özellikler
| Side 1 | |
|---|---|
| Family construction form | M12 |
| No. of poles | 4 |
| Coding | D |
| Gender | male |
| Mounting method | inserted, screwed |
| Tightening torque | 0,4 Nm |
| Cable outlet | straight |
| Material contact | Bronze |
| Degree of protection | IP67, IP65 (EN IEC 60529) |
| Side 2 | |
| Family construction form | Push-Lock spring clamp connection |
| Mounting method | Field-wireable |
| Electrical data | Supply | |
| Operating voltage AC | 48 V |
| Operating voltage DC | 60 V |
| Current operating per contact max. | 4 A |
| Operating voltage DC | 60 V (UL-listed) |
| Current operating per contact | 4 A (UL) |
| Industrial Communication | |
| Data transmission rate max. | 100 Mbit/s |
| Transfer parameters | CAT5, Class D (ISO/IEC 11801:2002), (EN 50173-1) |
| Diagnostics | |
| Status indication LED | No |
| Installation | |
| Cross section connection with wire end ferrule min. | 0,14 mm² |
| Cross section connection with wire end ferrule max. | 0,5 mm² |
| Cross section connection with wire end ferrule AWG min. | 28 AWG |
| Cross section connection with wire end ferrule AWG max. | 20 AWG |
| Cross section connection without wire end ferrule min. | 0,14 mm² |
| Cross section connection without wire end ferrule max. | 0,75 mm² |
| Cross section connection without wire end ferrule AWG min. | 26 AWG |
| Cross section connection without wire end ferrule AWG max. | 18 AWG |
| Installation | Connection | |
| Mating cycles min. | 100 |
| Connection information | Push-Lock spring clamp connection |
| Device protection | |
| Shielded | Yes |
| Device protection | Electrical | |
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Overvoltage category | II (EN 60950-1) |
| Mechanical data | Material data | |
| housing | Zinc die-casting |
| Material contact carrier | PA66 |
| Material contact | Bronze |
| Coating contact | gold plated |
| Locking material | Zinc die-casting |
| Coating locking | Nickeled |
| Gasket | NBR |
| Combustibility class (UL94) | V-0 |
| Mechanical data | Mounting data | |
| Mounting method | inserted, screwed, Shaking protection |
| Clamping range min. | 4 mm |
| Clamping range max. | 8 mm |
| Environmental characteristics | Climatic | |
| Operating temperature min. | -40 °C |
| Operating temperature max. | 85 °C |
| Important installation notes | |
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
| Conformity | |
| Product standard | EN IEC 61076-2-101 (M12) |
Teklif
Murrelektronik 7000-14801-0000000 için teklif isteyin
Ürün kodunu ve adedi yazın; size teklifle dönelim. Modelde kararsızsanız uygulamanızı anlatın, birlikte seçelim.