Murrelektronik 7000-12901-0000000

Ürün kodu 7000-12901-0000000

Teklif iste WhatsApp Ara

Teknik özellikler

Murrelektronik 7000-12901-0000000 teknik özellikleri
Side 1
Family construction form	M12
No. of poles	4
Coding	A
Gender	female
Mounting method	Field-wireable
Threaded hole	M12
Tightening torque	0,6 Nm
Width across flats	SW18
Cable outlet	straight
Material	PA
Material contact	Brass
Degree of protection	IP67 (EN IEC 60529)
Side 2
Mounting method	Field-wireable
Cable outlet	straight
Electrical data \| Supply
Operating voltage AC max.	250 V
Operating voltage DC max.	250 V
Current operating per contact max.	4 A
Installation
Connection cross section max.	0,75 mm²
Cross section connection without wire end ferrule AWG max.	18 AWG
Installation \| Connection
Tightening torque	0,6 Nm
Device protection
Shielded	No
Device protection \| Electrical
Additional condition protection degree	inserted, screwed
Pollution Degree	3
Overvoltage category	II (EN 60664-1)
Rated surge voltage	2,5 kV
Insulation resistance min.	100 mΩ
Material group	III (IEC 60664-1)
Mechanical data \| Mounting data
Height	54 mm
Width	20 mm
Depth	20 mm
Mounting method	inserted, screwed, Shaking protection
Clamping range min.	4 mm
Clamping range max.	6 mm
Environmental characteristics \| Climatic
Operating temperature min.	-40 °C
Operating temperature max.	85 °C
Important installation notes
Note on bending radius	Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.
Note on strain relief	Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties.
Note on mounting	The plug connectors must not be connected or disconnected under load. Non-compliance and improper use can result in personal injury., The user must take suitable safety precautions to ensure that the plug connector cannot be accidentally disconnected., To
Conformity
Product standard	EN IEC 61076-2-101 (M12)