1/2 Murrelektronik
Murrelektronik 7000-12411-6240500
Ürün kodu
7000-12411-6240500
Teknik özellikler
| Genel | |
|---|---|
| Cable length | 5 m |
| Side 1 | |
| Tightening torque | 0,6 Nm |
| Mounting method | inserted, screwed |
| Coating contact | gold plated |
| Family construction form | M12 |
| Thread | M12 x 1 |
| suitable for corrugated tube (internal Ø) | 10 mm |
| Cable outlet | angled |
| Coding | A |
| Material contact | Copper alloy |
| Material | PUR |
| No. of poles | 4 |
| Width across flats | SW13 |
| Degree of protection | IP65, IP66K, IP67 (EN IEC 60529) |
| Side 2 | |
| Stripping length (jacket) | 20 mm |
| Family construction form | free cable end |
| Electrical data | Supply | |
| Operating voltage DC | 24 V |
| Operating voltage DC min. | 18 V |
| Operating voltage DC max. | 30 V |
| Operating voltage DC max. | 30 V (UL-listed) |
| Current operating per contact max. | 4 A |
| Diagnostics | |
| Status indication LED | green, yellow |
| Installation | Connection | |
| Stripping length (jacket) | 20 mm |
| Mounting set | M12 x 1 |
| Gender | female |
| Device protection | Electrical | |
| Degree of protection | IP65, IP67, IP66K (EN IEC 60529) |
| Additional condition protection degree | inserted, screwed |
| Pollution Degree | 3 |
| Rated surge voltage | 0,8 kV |
| Material group | I (IEC 60664-1) |
| Mechanical data | Material data | |
| Coating locking | Nickeled |
| Coating of fitting | nickel plated |
| Locking material | Zinc die-casting |
| Material screw connection | Zinc die-casting |
| Mechanical data | Mounting data | |
| Mounting method | inserted, screwed, Shaking protection |
| Environmental characteristics | Climatic | |
| Operating temperature min. | -30 °C |
| Operating temperature max. | 85 °C |
| Additional condition temperature range | depending on cable quality |
| Important installation notes | |
| Note on strain relief | Protect the connectors by suitable measures from mechanical loads, e.g. by the usage of cable ties. |
| Note on bending radius | Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces. |
| Conformity | |
| Product standard | DIN EN 61076-2-101 (M12) |
Teklif
Murrelektronik 7000-12411-6240500 için teklif isteyin
Ürün kodunu ve adedi yazın; size teklifle dönelim. Modelde kararsızsanız uygulamanızı anlatın, birlikte seçelim.